How To Use Small Poultry Chicken Feed Pellet Mill Machine

2020-08-08 Back to List

How to use the small poultry chicken feed pellet mill machine？The economical 1 ton per hour ring die chicken feed pellet mill, specially designed for professional chicken feed line, is a new product researched, developed and launched by our excellent technical team through drawing up reasonable suggestions and following up users site for several years. This chicken feed pellet machine is featured with scientific and reasonable structure and design, easy operation, high output, low consumption, high forming ratio, suitable for processing corn, bean pulp, straw, grass, peanut shell etc.

Small Chicken poultry feed machine(1t/h ring die poultry feed mill machine)

This type poultry chicken feed pellet making machine is designed and developed with the technical practices from our technicians combined with the feedback opinions from plenty of clients under the base of the traditional ring die pellet milling machine. Since we put this type poultry feed mill machine in the market, majority of clients respond well(Best Cost for Investment of Small Poultry Chicken Feed Pellet Processing Machine>>). However, there are still some clients say that the output is low, it will be covered, the component is easy to damage etc. So, why do these problems occur? Improper operation causes those problems. Properly operating the feed pellet machine can not only increase its output, but also improving its lifetime.

How to operate chicken poultry feed machine?

1.Control the incoming raw materials well.

2.Moisture Content: The requirement of moisture depends on different kinds of raw materials. The moisture content of raw material is specified to 10%-18%. The materials should be mixed evenly.

3.Requested Size: The maximum size of the materials cannot exceed the diameter of the pelletizing hole. For example, if the diameter of the hole is 6mm, the length of the raw material cannot be more than 6mm. Please ensure the proper size of raw material according to the diameter of the hole.

4.Composition: This chicken feed pellet mill can process both single kind material and mixture with different materials. Pieces of stone and iron or other hard impurities cannot be mixed into the material; otherwise they will damage the die and roller.

5.Binder: Our mills are designed to pelletize without any additive binder.

6.New poultry feed mill machine needs running-in for the first time use.

The die you have received has never been used. Therefore you need to grind in the mill. Please grind in before the first operation. Oily mixture ingredients: Mix 20% fine sand, 65% biomass material (sawdust) and 15% waste engine oil evenly. Total weight can be 10% of the feed capacity.

New poultry feed mill machine needs running-in for the first time use.

7.Die grinding-in procedures

①Place a bucket under the discharge outlet. Collected material can be put back into the pellet mill to preheat the chicken poultry feed pellet mill.

②Start up.

③Input suitable amount of oily mixture into the mill.

④Continue to pour oily mixture in and let it run through pelletizing holes.

⑤Re-use the oily mixture in a recycling manner for 30-40 minutes.

8.Pelletizing

①Feed materials and run the chicken feed mill after preheating.

②Material with low moisture content may results in producing soft or powdery pellets; Material with high moisture content may leads to producing rough pellets.

③Loosen or tighten the adjusting bolts on the both sides if it cannot produce pellets.

④You may need to test several times on different materials or different moisture content to reach the best pellet quality.

⑤Please contact us if it still does not work well after adjustments.

RICHI is one large animal chicken feed pellet mill manufacturer devoting in feed processing equipment , integrating the design, manufacturing, installation, mainly produce all sorts of feed pellet machines, crushing machine, mixing machine, lifting machine, cooling machine,etc and the complete feed pellet production line machinery. About more chicken feed processing machines details, please Email: enquiry@cn-pellet.com,Whatsapp/Cel: +86 185 7410 3366.