Flat die pellet mill and ring die pellet mill,which is the best？

2019-11-18 Back to List

Looking for a wood pellet machine or feed pellet machine?Henan Richi Husbandry Machinery is reliable manufacturer and expert in pelletizing solutions.

The advantages of the flat die pellet mill that energy consumption, mobility, suitable for small family-style workshop, inappropriate to engage in large-scale enterprises engaged in plant operations. Another point, although the flat die pellet mill structural advantages, wear less, but smaller yield usually 300-3000 kg. So I would like to use one of these machines to complete production of more than 3 tons, the choice of ring die pellet mill, and this situation is limited to granulated corn stover, corn stover easy pressure. The disadvantage in low yield, low pressure, the material is difficult, poor shape. After working face if widened, wear pressure roller peace die is not balanced, reach a greater yield. Accessories dismantling cumbersome maintenance problems.

Ring die pellet mill is characterized by production of large particles forming beautiful, high density. Without any additives can also be used to make granules. Pressure roller ring mold wear leveling, can reduce the consumption of consumable goods. Ring die pellet mill feed in the press, especially fodder aspect is indeed a master, its yield, low power consumption, which is the flat die pellet mill can not match. The flat die pellet mill because of its speed is below the ring die pellet mill and other reasons, its production is less than the ring mold particle machine, and because the pressure is too large, suppression of fodder density is large, so in this respect distant ring die pellet mill lead.The disadvantage is generally high power consumption.

In short, the advantage is the disadvantage of ring mold flat die, flat die advantage is the lack of a ring mold. But it is recommended to use a ring mold machine as a large-scale biomass particles enterprise's main equipment is reasonable. Biomass particles are not large-scale operation is not amount to anything, that is no benefit at all. The loss is too much light fittings.